หน้าที่ความรับผิดชอบ: - Reviewed construction plans, specification, and drawings. - Assist with obtaining permits and other necessary documentation. - Prepare and reviewed pWPS / WPS / PQR / WQT, Reviewed NDE Procedure / Method statement to comply with ITP, project specifications and code standards. - Inspection material received such as appearance, dimension, mill certificate including test sampling cutting to comply with project specifications requirements. - Perform welder qualification test and issue welding certificate and card test. - Monitor construction activities for compliance with plans and specifications. - Prepare and maintain progress reports and documentation. - Coordinate with contractors and suppliers. - Record any conformances in work to ensure disposition of non-conformances in accordance with project requirement. - Issue report to the QA/QC Manager and pursue non-conformances and any other deficiencies requiring corrective actions. - Review and approve QC documentation for completion testing and handover of work packs, systems or parts of the plan. - Maintain register of all QA/QC documentation requiring foe work on site and ensure documents in use by site personal are correct issue. - Reviewed shop drawing and preparation running joint in weld-map. - Perform inspection welding consumable storage. - Perform Fit-up inspection such as joint preparation, alignment and dimension, tack weld to comply specification and drawing. - Monitored during weld perform inspection welder, tack welder, registers welding surveillance to comply WPS. - Visual inspection, after weld finish perform inspection weld appearance, surface condition to be free form defect. - Dimension inspection after weld finish, tolerances to be comply drawing. - Select joint NDE and submit to issue NDE request. - Monitor NDE process to process comply with procedure and verify joint correct with NDE request. - Internal final inspection before issue IRV to contractor. - Reviewed Fit-up report, Visual report, Welding history sheet and NDE Report are correct. - Final inspection with contractor and review document release to panting process. Application code: AWS D.1.1 / D1.2 /ASME Sec IX Material Type: S235 JR / S275 JR / S355MLO / API2W Gr.50 / API 5L X52QO PSL2 / ASTM A106 Gr. B / API2W Gr.50 / API 5L X52 / ASTM A53 Gr. B

เหตุผลที่ลาออก: The employment contract was terminated because the work was completed. Date of terminated 26-07-2025

หน้าที่ความรับผิดชอบ: - Perform NDT inspection & testing with method PT, UTM, PAUT header, tube of boiler, pipe process, PT finding crack on fang, and valve. - Interpretation result NDT testing and decide accept or reject comply with code standard requirement. - Team leadership and clearing scope of work with client. - Update progress and prepared daily report to client. - Prepared and review inspection test report. - Supervised team staff. Application code: ASME BPVC Sec I, ASME B31.1 Material Type: SA335 Gr P22, P91 / SA312 TP304, 316

เหตุผลที่ลาออก: End of contract

หน้าที่ความรับผิดชอบ: - Reviewed WPS / PQR / WQT / NDE Procedure / Method statement to comply with ITP, project specifications and code standards. - Inspection material such as appearance, dimension received to comply with project specifications requirements. - Witnessed welder qualification test. - Inspection welding consumable storage. - Fit-up inspection, check joint preparation, check dimension to comply with drawing. - Check welder, tack welder registers and check welding consumable to use. - Monitored during weld, perform check welding surveillance to comply WPS. - Visual inspection, after weld finish. - Witness dimension checked after weld finish. - Reviewed fit-up and visual report. - Reviewed NDE request. - Witnessed NDE inspection process. - Witnessed process leak test. - Reviewed NDE inspection test report, dimension test report and leak test report. - Final inspection before release to paint. - Reviewed welding history sheet. - Weekly progress report to section manager. - Reviewed documentation and all inspection report & traceability MDR. Application code: AWS D.1.1 / D1.2 /ASME Sec IX / JIS Material Type: STK400 / SS400 / SUS316L / Aluminum Alloy A5052P-H112

เหตุผลที่ลาออก: End of contract

หน้าที่ความรับผิดชอบ: - Reviewed WPS / PQR / WQT / NDE Procedure / Method statement to comply with ITP, project specifications and code standards. - Witnessed welder qualification test. - Reviewed shop drawing and weld-map included preparation and rectification. - Fit-up inspection, check joint preparation, check dimension to comply with drawing. - Witnessed dimension checked before weld. - Check welder, tack welder registers and check welding consumable. - Monitoring during weld, perform check welding surveillance to comply WPS. - Visual inspection, after weld finish. - Prepare and reviewed fit-up and visual report. - Identify weld joint to issued NDE request to third party. - Witnessed NDE inspection process. - Reviewed NDE inspection test report, dimension test report and weld history sheet. - Monitored percent reject late of the welder and analyze the root cause of imperfections to rectification case UT rejected. - Witnessed before bolt torque tightening process. - Monitored status and activities of process quality of steel structure such as fit-up, weld date, visual, NDE dimension, bolt torque tightening, punch list to complete process. - Weekly progress report to supervisor and main contractor. - Support QA to rectification and close NCR case. - Walk down inspection with main contractor and third party to record point unfinished works and issued internal punch list - Informed punch list to production to be rectified and monitored punch list cleared and closed status in system. - Gather and prepared document inspection completed process and issued release to paint. - Pre shipment inspection and issued release module according shipment. - Line checks piping and clearing closed master punch lists before leak test. - Flange management. Check flange face and measurement alignment flange before bolt torque tightening. Application code: AWS D.1.1 / EN1090 / ASME B31.1 / ASME B31.3 / ASME Sec. IX Material Type: S355JR / SM490YA / SS400 / S275JR / A325MSG / A1101 / SA106 Gr B / SA335 Gr P22, P91 / SA312 TP304, 316

เหตุผลที่ลาออก: The employment contract was terminated because the work was completed.